Kichler 43364 Manuel d'utilisateur
Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Kichler 43364. Kichler 43364 User Manual Manuel d'utilisatio
- Page / 2
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
17) Make wire connections (connectors not provided). Reference
chart below for correct connections and wire accordingly.
18) Push fixture to ceiling, carefully passing mounting screws
through holes in canopy.
19) Thread knurl knobs onto mounting screws. Tighten knurl
knobs to secure fixture to ceiling.
20) Lower glass down over socket. Pass hole in glass over socket.
21) Thread socket ring onto socket. Tighten socket ring to hold
glass in place. (DO NOT over tighten.)
22) Insert recommended bulb. CAUTION: DO NOT touch bulb
with bare hands. If this happens, clean bulb with denatured
alcohol and a lint free cloth.
23) Slip glass sleeve over bulb.
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
IMPORTANT SAFETY INSTRUCTIONS
LIGHTED BULB IS HOT!
WARNING: To reduce the risk of FIRE or INJURY TO PERSON:
• Turnoffandallowtocoolbeforereplacingbulb.
• BulbgetsHOTQUICKLY!Contactswitchonlywhenturningoff.
• DONOTremaininlightifskinfeelswarm.(Lightisintense,
may cause “sunburn”)
• DONOTlookdirectlyatlightedbulb.
• Keepmaterialsawayfrombulbthatmayburn.
• UseONLYwithwattagespeciedorlower.
• DONOTtouchbulbatanytime,useasoftcloth.Oilfromskin
may damage bulb.
• DONOToperatexturewithmissingordamagedglass.
1) Pass fixture wire through long threaded pipe.
2) Screw end of long threaded pipe with hexnut into coupling
on top of fixture body.
3) Pass fixture wire through tube. Lower tube down over
threaded pipe.
4) Pass fixture wire through hole in top cap. Pass hole in top
cap over end of threaded pipe. Set top cap on top of tube.
5) Pass fixture wire through coupling. Screw coupling onto end
of threaded pipe.
6) Pass wire through stem and screw stem to coupling on top
of fixture body. NOTE: Thread locking compound must be
applied to all stem threads as noted with symbol (3) to prevent
accidental rotation of fixture during cleaning, relamping, etc.
7) Pass wire through remaining stems and screw stems
together.
8) Thread one small threaded pipe into end of each small loop.
9) Attach small loop to end of last stem.
10) Pass threaded pipe at end of second small loop through
hole in canopy.
11) Slip lockwasher over threaded pipe protruding from inside of
canopy and screw hexnut onto threaded pipe.
12) Attach chain link to small loop at end of stem and to loop on
canopy.
13) TURN OFF POWER.
IMPORTANT:Beforeyoustart,NEVERattemptanywork
without shutting off the electricity until the work is done.
a) Go to the main fuse, or circuit breaker, box in your
home. Place the main power switch in the “OFF”
position.
b) Unscrew the fuse(s), or switch “OFF” the circuit breaker
switch(s), that control the power to the fixture or room
that you are working on.
c) Place the wall switch in the “OFF” position. If the fixture
to be replaced has a switch or pull chain, place those in
the “OFF” position.
14) Find the appropriate threaded holes on mounting strap.
Assemble mounting screws into threaded holes.
15) Attach mounting strap to outlet box. (Screws not provided).
Mounting strap can be adjusted to suit position of fixture.
16) Groundinginstructions:(SeeIllus.AorB).
A) On fixtures where mounting strap is provided with a
hole and two raised dimples. Wrap ground wire from
outlet box around green ground screw, and thread into
hole.
B) Onxtureswhereacuppedwasherisprovided.Attach
ground wire from outlet box under cupped washer and
green ground screw, and thread into mounting strap.
Ifxtureisprovidedwithgroundwire.Connectxture
ground wire to outlet box ground wire with wire connector
(not provided.) after following the above steps. Never
connect ground wire to black or white power supply wires.
Date Issued: 10/4/13 IS-43364-US
GREEN GROUND
SCREW
CUPPED
WASHER
A
B
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
(NOT PROVIDED)
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
SEE OTHER SIDE FOR SPANISH TRANSLATIONS.
VEA EL OTRO LADO DE TRADUCCIONES AL ESPAÑOL.
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
MOUNTING STRAP
ABRAZADERADEMONTAJE
CANOPY
ESCUDETE
FIXTUREBODY
CUERPODELARTEFACTO
KNURLKNOB
PERILLA ESTRADA
SMALL LOOP
ARGOLLAPEQUEÑA
CHAINLINK
ESLABÓNDECADENA
3
STEM
VASTAGO
GLASS
VIDRIO
BULB
BOMBILLA
GLASSSLEEVE
CAMISADEVIDRIO
COUPLING
ACOPLAMIENTO
TOPCAP
TAPA SUPERIOR
TUBE
TUBO
LONGTHREADEDPIPE
TUBOROSCADALARGO
SOCKETRING
ANILLO DEL
CASQULLO
1
2
Résumé du contenu
Page 1 - 866-558-5706
17) Make wire connections (connectors not provided). Reference chart below for correct connections and wire accordingly.18) Push fixture to ceilin
Page 2
Silalámparavieneconalambreatierra.Conecterel alambre a tierra de la lámpara al alambre a tierra de la caja tomacorriente con
Produits connexes et manuels pour Éclairage Kichler 43364
(2 pages)
(2 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.031 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels