Kichler 337010 Dual Speed and Light Switch Manuel d'utilisateur télécharger pdf

337010

WARNING

To avoid fire, shock and serious personal injury, follow these instructions:

1. Carefully read and retain this Instruction Manual for future reference.

2. To avoid possible electrical shock, be sure the electricity is turned off at

the main panel by removing the fuse or opening the circuit breaker.

3. This control switch is designed for use with "Ceiling Fans" ONLY. DO

NOT use with any other type of electrical appliance.

4. All wiring must conform to national and local electrical codes. If you feel

you do not have enough electrical knowledge, have a licensed electrician

install the control.

5. The amperage for your fan should not exceed 1.25A. The total wattage

for the lights 300W.

INSTALLATION AND OPERATING

INSTRUCTIONS

1. Disconnect the power and remove the existing wall plate and switch. (Fig. 1)

2. Push BOTH slide switches all the way down to the OFF position. (Fig.2)

3. Make each of the wire connections illustrated in Figure 3. Secure each

with the wire nuts provided.

Black wire going to the fan (motor) to the Black wire from the Switch.

In the Ceiling Outlet Box, connect the White (neutral) wire coming from

the Fan to the White (neutral) wire from the Household Supply.

Connect the Blue (For Light) wire coming from the fan to the Blue (For

Light) wire from the Switch.

Connect the Black & White (AC IN L) from the switch to the Black wire

going to the Household Supply.

4. If your ceiling outlet box has a ground wire (green or bare copper) connect

it to the ground wire from the ceiling fan and/or the ceiling mounting

bracket.

Fig. 2

Fig. 1

Fig. 3

DUAL SLIDE WALL CONTROL

INSTALLATION INSTRUCTIONS

Wall plate

Switch

Outlet box

Light

switch

Speed

switch

Blue (for light)

light switch lead

Black/white (AC IN L)

to hot household

Black (to motor)

speed control lead

Green ground ( ) lead

Fan

SUPPLY CIRCUIT

BLACK/

WHITE

BLACK

BLUE

BLACK

BLUE

BLACK

Ground Conductor

Outlet Box

Green Ground Lead

Ground to Downrod

GREEN

WHITE WHITE

1 2 3

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

337010WARNINGTo avoid fire, shock and serious personal injury, follow these instructions:1. Carefully read and retain this Instruction Manual for futu

Page 2 - TROUBLESHOOTING GUIDE

5. Attach the Speed/Light Switch to the wall outlet box and secure with the two screws provided. (Fig 4)6. Attach the wall plate to the switch with t

Page 3 - Hook up “in series” only

Warning!Hook up “in series” onlyDo not connect to hot and common wire of electric circuit or switch will be damaged. Refer to Fig. 6.Fig. 636-32"

Commentaires sur ces manuels

Pas de commentaire

Kichler 337010 Dual Speed and Light Switch Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Kichler 337010 Dual Speed and Light Switch. Kichler 337010 Dual Speed and Light Switch User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Kichler 337010 Dual Speed and Light Switch