1) Pass hole in bottom of side arm down over threaded stud on bottom arm.
2) Passholeintopofarmoverthreadedstudoncenterofxturebody.
3) Thread ball knobs onto threaded studs. Tighten ball knobs to secure
arm in place.
4) Repeat steps 1 - 3 for remaining side arms.
5) Screwendoflongthreadedpipeintocouplingontopofxturebody.
6) Lower tube down over long threaded pipe.
7) Pass hole in check ring over end of threaded pipe. Set check ring on top
of tube.
8) Threadloopontothreadedpipeontopofxturebody.
9) TURN OFF POWER.
IMPORTANT:Beforeyoustart,NEVERattemptanyworkwithout
shuttingofftheelectricityuntiltheworkisdone.
a) Gotothemainfuse,orcircuitbreaker,boxinyourhome.Place
the main power switch in the “OFF” position.
b) Unscrewthefuse(s),orswitch“OFF”thecircuitbreakerswitch(s),
thatcontrolthepowertothextureorroomthatyouareworkingon.
c) Placethewallswitchinthe“OFF”position.Ifthexturetobe
replacedhasaswitchorpullchain,placethoseinthe“OFF”
position.
10) Take threaded pipe from parts bag and screw in screw collar loop a
minimumof6mm(1/4”).Lockintoplacewithhexnut.
11) Runanotherhexnutdownthreadedpipealmosttouchingrsthexnut.
Now screw threaded pipe into mounting strap. Mounting strap must be
positionedwithextrudedthreadfacedintooutletbox.Threadedpipe
mustprotrudeoutthebackofmountingstrap.Screwthirdhexnutonto
end of threaded pipe protruding from back of mounting strap.
12)Connectmountingstraptooutletbox.
13)Unscrewthethreadedringfromscrewcollarloop.Takecanopyand
passoverscrewcollarloop.Approximatelyonehalfofthescrewcollar
loopexteriorthreadsshouldbeexposed.Adjustscrewcollarloopby
turningassemblyupordowninmountingstrap.Removecanopy.
14)Afterdesiredpositionisfound,tightenbothtopandbottomhexnutsup
against the bottom and top of the mounting strap.
15)Slipcanopyoverscrewcollarloopandthreadonthreadedring.Attach
chain(withxtureconnected)tobottomofscrewcollarloop.Unscrew
threadedring,letcanopyandthreadedringslipdown.
16) Weave electrical wire and ground wire through chain links no more than
3inchesapart.Passwirethroughthreadedring,canopy,screwcollar
loop,threadedpipeandintooutletbox.
17)Connectxturegroundwiretooutletboxgroundwirewithwireconnector.
(Not provided.) Never connect ground wire to black or white power
supplywire.
18) Make wire connections (connectors not provided). Reference chart
belowforcorrectconnectionsandwireaccordingly.
19)Raisecanopytoceiling.
20)Securecanopyinplacebytighteningthreadedringontoscrewcollar
loop.
21) Set glass down over socket.
22) Thread socket ring onto socket. Tighten socket ring to secure glass in
place. (DO NOT over tighten.)
Date Issued: 4/27/12 IS-43178-CB
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
INSTRUCTIONS
For Assembling and Installing Fixtures in Canada
Pour L’assemblage et L’installation Au Canada
SEE OTHER SIDE FOR CANADIAN FRENCH TRANS-
LATIONS.
VOIR L’AUTRE CÔTÉ POUR LES CANADIENS TRA-
DUCTIONS EN FRANÇAIS.
MOUNTING STRAP
PATTE DE FIXATION
HEXNUT
ECROU HEXAGONAL
THREADED PIPE
TUBE FILETÉ
SCREW COLLAR LOOP
COLLIER-ÉCROU
CANOPY
CACHE
THREADED RING
BAGUE FILETÉE
LOOP
ANNEAU
GLASS
VERRE
SOCKET RING
BAGUE DE LA DOUILLE
LONG THREADED PIPE
TUBE LONG FILETÉ
TUBE
TUBE
CHECK RING
ANNEAU DE RETENUE
BALL KNOB
BOULE
BALL KNOB
BOULE
THREADED STUD
GOUJON FILETÉ
SIDE ARM
BRAS
LATÉRAL
Commentaires sur ces manuels